Alligare Triclopyr 4 Herbicide (2.5 Gals) Triclopyr 61.6% NOT FOR NY, VT

Alligare Triclopyr 4 Herbicide (2.5 Gals) Triclopyr 61.6% NOT FOR NY, VT
Alligare Triclopyr 4 Herbicide (2.5 Gals) Triclopyr 61.6% NOT FOR NY, VT

Alligare Triclopyr 4 Herbicide (2.5 Gals) Triclopyr 61.6% NOT FOR NY, VT

Contains an active ingredient that is highly effective in controlling vegetation problems like Canada thistle, gallberry, salt cedar, and wax myrtle. Triclopyr 4 may be applied through both ground or aerial applications. This powerful selective herbicide is specially formulated to easily dilute with water or as an oil-water emulsion. Triclopyr 4 has less impact on grasses and can be used as foliar and basal treatments. Perfect to use on rangeland, forests, grass pastures, industrial manufacturing and storage sites, fence rows, rights-of-way, ornamental turf, non-crop areas around the farm, grazing areas and establishment, and maintenance of wildlife openings.

Great for restoring pastures and a solution to seasonably dry wetlands. Active Ingredient: Triclopyr - 61.6% Targets: Salt Cedar, Canada Thistle, Mustard, Purple Loosestrife, Gallberry, Wax Myrtle, Blackberry, and other woody plants, and annual and perennial broadleaf weeds.

Read the label for complete list. Use: Forests, Grass Pastures, Rangeland, CRP acres, Rights-of-Way, and in Non-Crop Areas and Ornamental Turf, Industrial Sites, and Non-Irrigation Ditch Banks.

Apply by diluting with water or as an oil-water emulsion. DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. Use Precautions Local conditions may affect the use of herbicides. Consult your local specialist for advice in selecting treatments from this label to best fit local conditions.

Avoid direct application to Christmas trees as conifer injury may result. When treating unwanted vegetation in Christmas tree plantations, use sprays directed away from conifers. While Alligare Triclopyr 4 is formulated as a low volatile ester, the combination of spray contact with impervious surfaces (such as roads and rocks) and increasing ambient air temperatures may result in an increase in the volatility potential for this herbicide, increasing risk for off-target injury to sensitive crops such as grapes and tomatoes. Use of this product in certain portions of California, Oregon, and Washington is subject to the January 22, 2004 Order for injunctive relief in Washington Toxics Coalition, et.

Agricultural Use Requirements for Forestry Uses: For use of this product on forestry sites, follow PPE and Reentry restrictions in the Agricultural Use Requirements section of this label. Use Requirements for Non-Cropland Areas: No worker protection Standard worker entry restrictions or worker notification requirements apply when this product is applied to non-cropland.

Alligare Triclopyr 4 may injure certain turfgrass species. Do not apply to bahiagrass, bentgrass, bermudagrass, centipedegrass, St. Augustine grass, or zoysiagrass, unless turf injury can be tolerated. Do not apply to exposed roots of shallow-rooted trees and shrubs.

Do not to golf course greens. Do not apply more than 2 quarts per acre in a single application when spot treating.

On use sites other than grazable areas and forestry sites, do not apply more than 8 lbs. Ae per acre per year of triclopyr (8 quarts/A/yr Alligare Triclopyr 4). On use sites that may be grazed, including rights-of-way, pasture, fence rows, and rangeland, do not apply more than 2 lbs.

Ae per acre per year of triclopyr 2 quarts. /A/yr of Alligare Triclopyr 4. On forestry use sites, do not apply more than 6 lbs. Ae per acre per year of triclopyr 6 quarts.

In Arizona: The state of Arizona has not approved Alligare Triclopyr 4 for use on plants grown for commercial production; specifically on designated grazing areas or use on sod farms. Do not apply through any type of irrigation system. Do not apply to ditches used to transport irrigation water. Do not apply where runoff or irrigation water may flow onto agricultural land as injury to crops may result. It is permissible to treat non-irrigation ditch banks, seasonably dry wetlands, floodplains, deltas, marshes, swamps, bogs and transitional areas between upland and lowland sites. Do not apply to open water such as lakes, reservoirs, rivers, streams, creeks, saltwater bays, or estuaries. Do not apply this product through mist blowers unless a drift control additive, high viscosity inverting system, or equivalent is used to control spray drift. Do not make direct applications or allow spray mists to drift onto cotton, fruit or orchard trees, shrubs, grapes, peanuts, soybeans, tobacco, vegetable crops, flowers, citrus, or other desirable broadleaf plants. Many forbs (herbaceous broadleafs) are susceptible to Alligare Triclopyr 4.

Unless injury or loss of such plants can be tolerated, do not spray pastures containing desirable broadleaf forbs (especially legumes such as clover). After applications, the stand and growth of established grasses are usually improved, especially when rainfall is adequate and grazing is deferred.

While established grasses are tolerant of this product, newly seeded grasses may be injured until well established (as indicated by vigorous growth, tillering and the development of a secondary root system). Do not reseed treated areas for a minimum of three weeks after treatment. Portions of grazed areas that intersect treated non-cropland, rights-of-way, and forestry sites may be treated at up to 8 lbs. Ae per acre if the area to be treated on the day of the application comprises no more than 10% of the total grazable area. Grazing and Haying Restrictions Grazing Lactating Dairy Animals: Do not allow lactating dairy animals to graze treated areas until the next growing season following application of this product.

Do not harvest hay for 14 days after application. Slaughter Restrictions: Withdraw livestock from grazing treated grass or consumption of treated hay at least 3 days before slaughter. This restriction applies to graze during the season following treatment or hay harvested during the season following treatment. APPLICATION DIRECTIONS Spray Volume Per Acre 400 - Do not use (2 quarts/acre) - 1.5 (6 quarts/acre) - 2 (8 quarts/acre) 300 - Do not use (2 quarts/acre) - 2 (6 quarts/acre) - 2.7 (8 quarts/acre) 200 - Do not use (2 quarts/acre) - 3 (6 quarts/acre) - 4 (8 quarts/acre) 100 - 2 (2 quarts/acre) - 6 (6 quarts/acre) - 8 (8 quarts/acre) 50 - 4 (2 quarts/acre) - 12 (6 quarts/acre) -16 (8 quarts/acre) 20 -10 (2 quarts/acre) - 30 (6 quarts/acre) - 40 (8 quarts/acre) 10 - 20 (2 quarts/acre) - 60 (6 quarts/acre) - 80 (8 quarts/acre) Mixing Directions: Apply Alligare Triclopyr 4 foliarly by diluting with water or as an oil-water emulsion.

NOTE: An oil-water emulsion performs more dependably under a broader range of conditions than a straight water dilution for woody plant control and is recommended for aerial applications. Oil-Water Emulsions NOTE: Prior to preparing oil-water emulsion sprays in the mixing tank, conduct a jar test to check spray mix compatibility. Prepare the oil-water emulsion using diesel fuel, fuel oil, or kerosene plus an emulsifier such as Sponto 712 or Triton X-100.

Ground Application: Add oil at a rate of 5 to 10% of the total to the spray mix (up to a maximum of 1 gallon of oil per acre) and use an agricultural spray emulsifier according to mixing instructions below. Aerial Application: Add a 1:5 ratio of oil and water (1 part oil to 5 parts water) to the spray mixture (up to a maximum of 1 gallon of oil per acre) according to the mixing instructions below. Tank Mixing Alligare Triclopyr 4 may be applied in combination with labeled rates of other herbicides provided: The tank mix product(s) are labeled for the timing and method of application for the use site to be treated; and, Tank mixing is not prohibited by the label of the tank mix product(s). Tank Mixing Precautions: Read carefully and follow all applicable use directions, limitations, and precautions in the respective product labels.

Do not exceed specified application rates. If products containing the same active ingredient are tank mixed, do not exceed the maximum allowable active ingredient use rates. When using spray equipment where the product formulations will be mixed in undiluted form (such as direct injection), special care should be taken to ensure tank mix compatibility.

Pest Control Products always have a label attached and it is here by noted that for all purposes the label is the law and according to federal law the product label must be followed and that any pesticide product must be used according to the label directions. Any advice or recommendations given by American Pest supplies or anyone representing American Pest Supplies will never be intended to take the place of the pesticide label. The pesticide label is the law and a legal document. Always read and follow the label directions before using any pesticide product.

It is the sole responsibility of the purchaser and/or the end user to provide a license, permit, registration etc. The products we sell are intended for personal use only, in accordance with the customer's state laws and restrictions. The item "Alligare Triclopyr 4 Herbicide (2.5 Gals) Triclopyr 61.6% NOT FOR NY, VT" is in sale since Tuesday, July 30, 2019.

This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Weed & Pest Control\Weed Control\Herbicides & Fungicides". The seller is "americanpestsupply" and is located in Atlanta, Georgia. This item can be shipped to United States.


Alligare Triclopyr 4 Herbicide (2.5 Gals) Triclopyr 61.6% NOT FOR NY, VT


Index   Sitemap   Contact Form   Privacy Policy Agreement   Terms of service