Bora-Care with Mold Care 128oz- Mold Termite Treatment

Bora-Care with Mold-Care is a revolutionary product designed to tackle the challenging issues of mold, wood decay, and wood-destroying insects. It's a unique solution that combines the power of a wood preservative with a mold treatment, providing long-lasting protection for homes, especially in flood-prone areas. This guide will walk you through the essential aspects of Bora-Care with Mold-Care, including its application, usage, targeted fungi, application rates, and safety measures. What is Bora-Care with Mold-Care?

Bora-Care with Mold-Care is a dual-action treatment that addresses both mold prevention and wood preservation. The product contains Disodium Octaborate Tetrahydrate (Borate) at 40% for wood preservation and Didecyl dimethyl ammonium chloride at 80% for mold care.

It's the only EPA-registered product that not only kills mold but also prevents it from returning, while simultaneously protecting wood from termites, powderpost beetles, and other wood-destroying insects. How to Use Bora-Care with Mold-Care. To use Bora-Care with Mold-Care effectively, follow these steps.

Preparation : Before applying Bora-Care with Mold-Care, clean the surfaces with a product like Mold-Clean to eliminate any existing mold and fungus stains. Mixing : Mix the product with warm water only. The typical dilution rate for mold prevention is 5:1 (water to Bora-Care with Mold-Care). For wood-destroying insects, a 1:1 ratio is required, but note that Bora-Care with Mold-Care is not intended for active infestations at the 5:1 dilution. Application : Apply the solution to raw wood surfaces using a sprayer.

Ensure that the wood is bare, as Bora-Care with Mold-Care cannot penetrate painted, stained, or sealed surfaces. Bora-Care with Mold-Care is suitable for use in. Homes, particularly in kitchens, bathrooms, and crawlspaces. Structural wood surfaces such as bare wood, plywood, particleboard, and oriented strand board (OSB). While Bora-Care with Mold-Care is not specifically labeled for lawn fungus, it is effective against mold and wood decay fungi that can affect wooden structures in your lawn and garden.

It inhibits the growth of dry rot, wet rot, and mold on wood surfaces. The amount of Bora-Care with Mold-Care to apply will depend on the size of the area and the type of application. For mold prevention, mix at a 5:1 water-to-product ratio. For a new construction preventative application, use a 1:1 ratio.

When using Bora-Care with Mold-Care, take the following safety precautions. Wear appropriate personal protective equipment (PPE), including gloves and eye protection. Ensure the area is well-ventilated during application. Store the product in a cool, dry place, away from children and pets. Dispose of any unused product and container in accordance with local, state, and federal regulations.

Bora-Care with Mold-Care is an essential product for homeowners looking to protect their property from the damaging effects of mold and wood-destroying insects. By following the correct preparation, mixing, and application procedures, and adhering to safety guidelines, you can ensure long-lasting protection for your home's wooden structures. Remember, Bora-Care with Mold-Care is a preventative measure and should not be used to treat active insect infestations at the dilution rate for mold care. Always consult the product label for detailed instructions and use the product as directed for the best results.