Interlux Ultra-Kote Hard Antifouling Bottom Paint Black 1 Gallon Y3779U1

Interlux Ultra-Kote Hard Antifouling High Copper Bottom PaintFor tough, long-lasting protection, Interlux Ultra Kote delivers a durable, hard finish that resists fouling in high-growth waters. This high-performance Interlux Ultra bottom paint is made to withstand heavy use, making it ideal for powerboats and racing vessels that demand a smooth, efficient hull. Its advanced formula provides excellent adhesion and wear resistance, ensuring season-long antifouling protection. Ultra Kote offers reliable defense against barnacles and algae while maintaining a sleek, fuel-efficient surface. Available in blue, black, green or red.

Protect your vessel with Interlux Ultra-Kote Bottom Paint, formulated to keep your hull free from fouling and optimized for performance. This hard, durable coating provides excellent protection against all types of marine growth, ensuring your boat maintains its speed and efficiency. Ideal for boats in high-fouling areas, Ultra-Kote offers a strong defense, keeping your underwater surfaces clean and smooth season after season.

The Interlux Ultra-Kote is a high performance antifouling paint that is perfect for areas that experience moderate to severe fouling. Designed to provide maximum performance, the high copper hard coating provides excellent long term protection from shell fouling, such as barnacles. Thanks to the fast drying formula Ultra-Koat allows you to paint and launch in the same day. Can be used on Fiberglass, wood, or properly primed still with the addition of color stability for a uniform look. Able to be used in fresh water, salt water, & brackish water.

Thin no more than 10% (except conventional spray). Must be thinned 5-10% bu volume with Special Thinner 216; Conventional Spray; Pressure Pot: Pressure : 3.44-4.47 bar/50-65 psi (gun pressure); 10-15 psi (pot pressure); Tip Size: 1.83-2.2 mm/70-85 thou. Thin 10-15" with Special Thinner 216 for application by Pressure Pot; Roller; Use a 3/8" nap solvent resistant roller; Surface Preparation Good Condition; Remove all traces of loose paint & contamination by sanding; Sand using an 80 grit wet-dry sandpaper; Remove sanding residue; Poor Condition; Completely remove all old antifouling paint; For Fiberglass & wood use Interstrip 299E; For Steel sandblast to a near white metal; Bare Fiberglass Preparation; Fiberglass must be properly prepared to prevent delamination; Remove mold release wax using Fiberglass Surface Prep YMA601V or Fiberglass Solvent Wash 202; Fill any surface imperfections with Interlux Watertite; Once surface is properly prepared follow the application system below; Bare Fiberglass - No Sanding System; Clean following the above preparation procedure; Apply one coat of Interprotect 2000E or Fiberglass No-Sand Primer; Following overcoating guidelines for the primer, apply 2 coats of Ultra-Kote allowing appropriate drying times; Bare Fiberglass - Sanding System; Clean following the above preparation procedure; Sand with 80 grade (grit) paper; Remove sanding residue; Apply at least 2 coats of Ultra-Kote allowing for appropriate dry times; Bare Fiberglass - Blister Prevention System; Clean following the above preparation procedure; Sand with 80 grade (grit) paper; Remove sanding residue; Apply Interprotect 2000E to a thickness of 10 mils; Apply at least two coats of Ultra-Kote unthinned, allowing for the appropriate dry times; Barewood; Sand with 80 grade (grit) paper; Remove sanding residue; Apply the first coat of Ultra-Kote thinned 10% with Special Thinner 216 or Brush-Ease 433; If necessary, fill seams with Seam Compound Brown 30; Apply 2 or more coats of Ultra-Kote unthinned, allowing for appropriate dry times; Underwater Metals; Do NOT use on aluminum; Contact Interlux Technical Service Dept.